Glossary / Lexicon

The Iso 6162-2 2002 is a standard with the title "Hydraulic fluid power". Flange connectors with split or one-piece flange clamps and metric or inch screws. Flange connectors for use at pressures of 35 MPa (350 bar) to 40 MPa (400 bar), DN 13 to DN 51.

ISO 6165:2002
Earth-moving machinery. Basic types. Vocabulary

ISO 6166:2001
Securities and related financial instruments. International securities identification numbering system (ISIN)

ISO 6179:2001
Rubber, vulcanized or thermoplastic. Rubber sheets and rubber-coated fabrics. Determination of transmission rate of volatile liquids (gravimetric technique)

ISO 6185-1:2001
Inflatable boats. Boats with a maximum motor power rating of 4,5 kW

ISO 6185-2:2001
Inflatable boats. Boats with a maximum motor power rating of 4.5 kW to 15 kW inclusive

ISO 6185-3:2001
Inflatable boats. Boats with maximum motor power rating of 15 kW and greater

ISO 6186:1999
Plastics. Determination of pourability

ISO 6194-4:1999
Rotary shaft lip type seals. Performance test procedures

ISO 6195:2002
Fluid power systems and components. Cylinder-rod wiper-ring housings in reciprocating applications. Dimensions and tolerances

ISO 6196-1:1993
Micrographics. Vocabulary. General terms

ISO 6196-2:1993
Micrographics. Vocabulary. Image positions and methods of recording

ISO 6196-3:1997
Micrographics. Vocabulary. Film processing

ISO 6196-4:1998
Micrographics. Vocabulary. Materials and packaging

ISO 6196-5:1987
Micrographics. Vocabulary. Quality of images, legibility, inspection

ISO 6196-6:1992
Micrographics. Vocabulary. Equipment

ISO 6196-7:1992
Micrographics. Vocabulary. Computer micrographics

ISO 6196-10:1999
Micrographics. Vocabulary. Index

ISO 6198:1993
Micrographics. Readers for transparent microforms. Performance characteristics

ISO 6199:1991
Micrographics. Microfilming of documents on 16 mm and 35 mm silver-gelatin type microfilm. Operating procedures

ISO 6200:1999
Micrographics. First generation silver-gelatin microforms of source documents. Density specifications and method of measurement

ISO 6222:1999
Water quality. Enumeration of culturable micro-organisms. Colony count by inoculation in a nutrient agar culture medium

ISO 6224:1997
Plastics hoses, textile-reinforced, for general-purpose water applications. Specification

ISO 6243:1997
Climatic data for building design. Proposed system of symbols

ISO 6245:2001
Petroleum products. Determination of ash

ISO 6246:1998
Petroleum products. Gum content of light and middle distillate fuels. Jet evaporation method

ISO 6251:1998
Liquid petroleum gases. Corrosiveness to copper. Copper strip test

ISO 6252:1998
Plastics. Determination of environmental stress cracking (ESC). Constant-tensile-stress method

ISO 6259-1:2001
Thermoplastics pipes. Determination of tensile properties. General test method

ISO 6263:1997
Hydraulic fluid power. Compensated flow-control valves. Mounting surfaces

ISO 6264:1998
Hydraulic fluid power. Pressure-relief valves. Mounting surfaces

ISO 6270-1:2001
Paints and varnishes. Determination of resistance to humidity. Continuous condensation

ISO 6272:1994
Paints and varnishes. Falling-weight test

ISO 6284:1999
Construction drawings. Indication of limit deviations

ISO 6292:1996
Powered industrial trucks and tractors. Brake performance and component strength

ISO 6301-1:1997
Pneumatic fluid power. Compressed air lubricators. Main characteristics to be included in supplier's literature and product-marking requirements

ISO 6301-2:1997
Pneumatic fluid power. Compressed air lubricators. Test methods to determine the main characteristics to be included in supplier's literature

ISO 6320:2000
Animal and vegetable fats and oils. Determination of refractive index

ISO 6321:2002
Animal and vegetable fats and oils. Determination of melting point in open capillary tubes (slip point)

ISO 6326-3:1998
Natural gas. Determination of sulfur compounds. Determination of hydrogen sulfide, mercaptan sulfur, and carbonyl sulfide sulfur by potentiometry

ISO 6326-5:1998
Natural gas. Determination of sulfur compounds. Lingener combustion method

ISO 6328:2000
Photography. Photographic materials. Determination of ISO resolving power

ISO 6330:2001
Textiles. Domestic washing and drying procedures for textile testing

ISO 6336-1:1996
Calculation of load capacity of spur and helical gears. Basic principles, introduction and general influence factors

ISO 6336-2:1996
Calculation of load capacity of spur and helical gears. Calculation of surface durability (pitting)

ISO 6336-3:1996
Calculation of load capacity of spur and helical gears. Calculation of tooth bending strength

ISO 6336-5:2003
Calculation of load capacity of spur and helical gears. Strength and quality of materials

ISO 6341:1996
Water quality. Biological methods. Water quality. Determination of the inhibition of the mobility of Daphnia magna Straus (Cladocera, Crustacea). Acute toxicity test

ISO 6344-1:1998
Coated abrasives. Grain size analysis. Grain size distribution test

ISO 6344-2:1998
Coated abrasives. Grain size analysis. Determination of grain size distribution of macrogrits P12 to P220

ISO 6344-3:1998
Coated abrasives. Grain size analysis. Determination of grain size distribution of microgrits P240 to P2500

ISO 6346:1996
Freight containers. Coding, identification and marking

ISO 6348:1980
Textiles. Determination of mass. Vocabulary

ISO 6356:2000
Textile floor coverings. Assessment of static electrical propensity. Walking test

ISO 6393:1998
Acoustics. Measurement of exterior noise emitted by earth-moving machinery. Stationary test conditions

ISO 6394:1998
Acoustics. Measurement at the operator's position of noise emitted by earth-moving machinery. Stationary test conditions

ISO 6402-1:2002
Plastics. Impact resistant acrylonitrile/styrene moulding and extrusion materials (ASA, AES, ACS), excluding butadiene-modified materials. Designation system and basis for specifications

ISO 6402-2:1999
Plastics. Impact resistant acrylonitrile/styrene moulding and extrusion materials (ASA, AES, ACS), excluding butadiene-modified materials. Preparation of test specimens and determination of properties

ISO 6410-1:1996
Technical drawings. Screw threads and threaded parts. General conventions

ISO 6410-2:1996
Technical drawings. Screw threads and threaded parts. Screw thread inserts

ISO 6410-3:1996
Technical drawings. Screw threads and threaded parts. Simplified representation

ISO 6411:1997
Technical drawings. Simplified representation of centre holes

ISO 6412-1:1995
Technical drawings. Simplified representation of pipelines. General rules and orthogonal representation

ISO 6412-2:1995
Technical drawings. Simplified representation of pipelines. Isometric projection

ISO 6412-3:1996
Technical drawings. Simplified representation of pipelines. Terminal features of ventilation and drainage systems

ISO 6413:1995
Technical drawings. Representation of splines and serrations

ISO 6414:1995
Technical drawings for glassware

ISO 6426-2:2002
Horological vocabulary. Technical and commercial definitions

ISO 6427:1999
Plastics. Determination of matter extractable by organic solvents (conventional methods)

ISO 6428:1999
Technical drawings. Requirements for microcopying

ISO/IEC 6429:1992
Information technology. Control functions for coded character sets

ISO 6431:1992
Pneumatic fluid power. Single rod cylinders, 1.000 kPa (10 bar) series, with detachable mountings, bores from 32 mm to 320 mm. Mounting dimensions

ISO 6432:1985
Pneumatic fluid power. Single rod cylinders. 10 bar (1.000 kPa) series. Bores from 8 to 25 mm. Mounting dimensions

ISO 6433:1995
Technical drawings. Item references

ISO 6446:1994
Rubber products. Bridge bearings. Specification for rubber materials

ISO 6468:1997
Water quality. Determination of certain organochlorine insecticides, polychlorinated biphenyls and chlorobenzenes. Gas chromatographic method after liquid-liquid extraction

ISO 6489-1:2001
Agricultural vehicles. Mechanical connections between towed and towing vehicles. Dimensions of hitch-hooks

ISO 6489-2:2002
Agricultural vehicles. Mechanical connections between towed and towing vehicles. Specifications for clevis coupling 40

ISO 6497:2002
Animal feeding stuffs. Sampling

ISO 6506-1:1999
Metallic materials. Brinell hardness test. Test method

ISO 6506-2:1999
Metallic materials. Brinell hardness test. Verification and calibration of Brinell hardness testing machines

ISO 6506-3:1999
Metallic materials. Brinell hardness test. Calibration of reference blocks

ISO 6507-1:1998
Metallic materials. Vickers hardness test. Test method

ISO 6507-2:1998
Metallic materials. Vickers hardness test. Verification of testing machines

ISO 6507-3:1998
Metallic materials. Vickers hardness test. Calibration of reference blocks

ISO 6508-1:1999
Metallic materials. Rockwell hardness test. Test method (scales A, B, C, D, E, F, G, H, K, N, T)

ISO 6508-2:1999
Metallic materials. Rockwell hardness test. Verification and calibration of testing machines (scales A, B, C, D, E, F, G, H, K, N, T)

ISO 6508-3:1999
Metallic materials. Rockwell hardness test. Calibration of reference blocks (scales A, B, C, D, E, F, G, H, K, N, T)

ISO 6509:1995
Corrosion of metals and alloys. Determination of dezincification resistance of brass

ISO 6518-1:2002
Road vehicles. Ignition systems. Vocabulary

ISO 6520-1:1998
Welding and allied processes. Classification of geometric imperfections in metallic materials. Fusion welding

ISO 6520-2:2002
Welding and allied processes. Classification of geometric imperfections in metallic materials. Welding with pressure

ISO/IEC 6522:1992
Information technology. Programming languages. PL/I general purpose subset

ISO/IEC 6523-1:1998
Information technology. Structure for the identification of organizations and organization parts. Identification of organization identification schemes

ISO/IEC 6523-2:1998
Information technology. Structure for the identification of organizations and organization parts. Registration of organization identification schemes

ISO 6529:2001
Protective clothing. Protection against chemicals. Determination of resistance of protective clothing materials to permeation by liquids and gases

ISO 6531:1999
Machinery for forestry. Portable hand-held chain-saws. Vocabulary

ISO 6533:2001
Forestry machinery. Portable chain-saw front hand-guard. Dimensions and clearances

ISO 6547:1981
Hydraulic fluid power. Cylinders. Piston seal housings incorporating bearing rings. Dimensions and tolerances

ISO 6549:1999
Road vehicles. Procedure for H- and R-point determination

ISO 6550-3:2002
Road vehicles. Sheath-type glow-plugs with conical seating and their cylinder head housing. M10 glow-plugs

ISO 6551:1996
Petroleum liquids and gases. Fidelity and security of dynamic measurement. Cabled transmission of electric and/or electronic pulsed data

ISO 6570:2001
Natural gas. Determination of potential hydrocarbon liquid content. Gravimetric methods

ISO 6579:2002
Microbiology of food and animal feeding stuffs. Horizontal method for the detection of Salmonella spp

ISO/IEC 6592:2000
Information technology. Guidelines for the documentation of computer-based application systems

ISO 6603-1:2000
Plastics. Determination of multi-axial impact behaviour of rigid plastics. Non-instrumented impact testing

ISO 6603-2:2000
Plastics. Determination of multi-axial impact behaviour of rigid plastics. Instrumented puncture testing

ISO 6605:2002
Hydraulic fluid power. Hoses and hose assemblies. Test methods

ISO 6644:2002
Flowing cereals and milled cereal products. Automatic sampling by mechanical means

ISO 6646:2000
Rice. Determination of the potential milling yield from paddy and husked rice

ISO 6656:2002
Animal and vegetable fats and oils. Determination of polyethylene-type polymers

ISO 6670:2002
Instant coffee. Sampling method for bulk units with liners

ISO 6673:2003
Green coffee. Determination of loss in mass at 105$0DC

ISO 6682:1995
Earth-moving machinery. Zones of comfort and reach for controls

ISO 6683:2000
Earth-moving machinery. Seat belts and seat belt anchorages

ISO 6686:1995
Equipment for crop protection. Anti-drip devices. Determination of performance

ISO 6690:1996
Milking machine installations. Mechanical tests

ISO 6708:1996
Pipework components. Definition and selection of DN (nominal size)

ISO 6710:1995
Single-use containers for venous blood specimen collection

ISO 6721-1:2002
Plastics. Determination of dynamic mechanical properties. General principles

ISO 6721-2:1996
Plastics. Determination of dynamic mechanical properties. Torsion-pendulum method

ISO 6721-3:1996
Plastics. Determination of dynamic mechanical properties. Flexural vibration. Resonance-curve method

ISO 6721-10:1999
Plastics. Determination of dynamic mechanical properties. Complex shear viscosity using a parallel-plate oscillatory rheometer

ISO 6741-1:1989
Textiles. Fibres and yarns. Determination of commercial mass of consignments. Mass determination and calculations

ISO 6741-2:1987
Textiles. Fibres and yarns. Determination of commercial mass of consignments. Methods for obtaining laboratory samples

ISO 6741-3:1987
Textiles. Fibres and yarns. Determination of commercial mass of consignments. Specimen cleaning procedures

ISO 6743-1:2002
Lubricants, industrial oils and related products (class L). Classification. Family A (Total loss systems)

ISO 6743-4:2001
Lubricants, industrial oils and related products (class L). Classification. Family H (hydraulic systems)

ISO 6743-99:2002
Lubricants, industrial oils and related products (class L). Classification. General

ISO 6746-1:2003
Earth-moving machinery. Definitions of dimensions and codes. Base machine

ISO 6746-2:2003
Earth-moving machinery. Definitions of dimensions and codes. Equipment and attachments

ISO 6751:1998
Tools for moulding. Ejector pins with cylindrical head

ISO 6753-2:1998
Tools for pressing and moulding. Machined plates. Machined plates for moulds

ISO 6768:1998
Ambient air. Determination of mass concentration of nitrogen dioxide. Modified Griess-Saltzman method

ISO 6780:1988
General-purpose flat pallets for through transit of goods. Principal dimensions and tolerances

ISO 6787:2001
Assembly tools for screws and nuts. Adjustable wrenches

ISO 6789:2003
Assembly tools for screws and nuts. Hand torque tools. Requirements and test methods for design conformance testing, quality conformance testing and recalibration procedure

ISO 6798:1995
Reciprocating internal combustion engines. Measurement of emitted airborne noise. Engineering method and survey method

ISO 6800:1998
Animal and vegetable fats and oils. Determination of the composition of fatty acids in the 2-position of the triglyceride molecules

ISO 6803:1997
Rubber or plastics hoses and hose assemblies. Hydraulic-pressure impulse test without flexing

ISO 6805:1994
Rubber hoses and hose assemblies for underground mining. Wire-reinforced hydraulic types for coal mining. Specification

ISO 6806:1996
Rubber hoses and hose assemblies for use in oil burners. Specification

ISO 6808:2001
Plastics hoses and hose assemblies for suction and low-pressure discharge of petroleum liquids. Specification

ISO TR 6809:1996
Rubber compounding ingredients. Carbon black. Standard reference blacks

ISO 6811:1998
Spherical plain bearings. Vocabulary

ISO 6813:1998
Road vehicles. Collision classification. Terminology

ISO 6817:1997
Measurement of conductive liquid flow in closed conduits. Method using electromagnetic flowmeters

ISO 6846:1992
Photography. Black and white continuous tone papers. Determination of ISO speed and ISO range for printing

ISO 6847:2001
Welding consumables. Deposition of a weld metal pad for chemical analysis

ISO 6849:1996
Photography. Processing wastes. Determination of boron

ISO 6851:2001
Photography. Processing waste. Determination of total amino nitrogen (microdiffusion Kjeldahl method)

ISO 6853:2001
Photography. Processing waste. Determination of ammoniacal nitrogen (microdiffusion method)

ISO 6860:1995
Paints and varnishes. Bend test (conical mandrel)

ISO 6861:1996
Information and documentation. Glagolitic alphabet coded character set for bibliographic information interchange

ISO 6867:2001
Animal feeding stuffs. Determination of vitamin E content. Method using high-performance liquid chromatography

ISO 6869:2001
Animal feeding stuffs. Determination of the contents of calcium, copper, iron, magnesium, manganese, potassium, sodium and zinc. Method using atomic absorption spectrometry

ISO 6870:2002
Animal feeding stuffs. Qualitative determination of zearalenone

ISO 6871-1:1997
Dental base metal casting alloys. Cobalt-based alloys

ISO 6871-2:1997
Dental base metal casting alloys. Nickel-based alloys

ISO 6872:1999
Dental ceramic

ISO 6873:2000
Dental gypsum products

ISO 6875:1997
Dental equipment. Dental patient chair

ISO 6876:2002
Dental root canal sealing materials

ISO 6877:1998
Dental root-canal obturating points

ISO 6879:1995
Air quality. Performance characteristics and related concepts for air quality measuring methods

ISO 6885:2001
Animal and vegetable fats and oils. Determination of anisidine value

ISO 6887-1:1999
Microbiology of food and animal feeding stuffs. Preparation of test samples, initial suspension and decimal dilutions for microbiological examination. General rules for the preparation of the initial suspension and decimal dilutions

ISO 6887-2:2003
Microbiology of food and animal feeding stuffs. Preparation of test samples, initial suspension and decimal dilutions for microbiological examination. Specific rules for the preparation of meat and meat products

ISO 6887-3:2003
Microbiology of food and animal feeding stuffs. Preparation of test samples, initial suspension and decimal dilutions for microbiological examination. Specific rules for the preparation of fish and fishery products

Microbiology of food and animal feeding stuffs. Preparation of test samples, initial suspension and decimal dilutions for microbiological examination. Specific rules for the preparation of products other than milk and milk products, meat and meat products, and fish and fishery products

ISO 6888-1:1999
Microbiology of food and animal feeding stuffs. Horizontal method for the enumeration of coagulase-positive staphylococci ($7IStaphylococcus aureus$7R and other species). Technique using Baird-Parker agar medium

ISO 6888-2:1999
Microbiology of food and animal feeding stuffs. Horizontal method for the enumeration of coagulase-positive staphylococci ($7IStaphylococcus aureus$7R and other species). Technique using rabbit plasma fibrinogen agar medium

ISO 6888-3:2003
Microbiology of food and animal feeding stuffs. Horizontal method for the enumeration of coagulase-positive staphylococci ($7IStaphylococcus aureus$7R and other species). Detection and MPN technique for low numbers

ISO 6916-1:1995
Flexible cellular polymeric materials. Sponge and expanded cellular rubber products. Specification. Sheeting

ISO 6926:2001
Acoustics. Requirements for the performance and calibration of reference sound sources for the determination of sound power levels

ISO 6939:1988
Textiles. Yarns from packages. Method of test for breaking strength of yarn by the skein method

ISO 6940:1995
Textile fabrics. Burning behaviour. Determination of ease of ignition of vertically oriented specimens

ISO 6941:1995
Textile fabrics. Burning behaviour. Measurement of flame spread properties of vertically oriented specimens

ISO 6942:2002
Protective clothing. Protection against heat and fire. Method of test: Evaluation of materials and material assemblies when exposed to a source of radiant heat

ISO 6945:1996
Rubber hoses. Determination of abrasion resistance of the outer cover

ISO 6946:1997
Building components and building elements. Thermal resistance and thermal transmittance. Calculation method

ISO 6947:1997
Welds. Working positions. Definitions of angles of slope and rotation

ISO 6953-1:2000
Pneumatic fluid power. Compressed air pressure regulators and filter-regulators. Main characteristics to be included in literature from suppliers and product-marking requirements

ISO 6953-2:2000
Pneumatic fluid power. Compressed air pressure regulators and filter-regulators. Test methods to determine the main characteristics to be included in literature from suppliers

ISO 6954:2000
Mechanical vibration. Guidelines for the measurement, reporting and evaluation of vibration with regard to habitability on passenger and merchant ships

ISO 6971:2002
Cranked-link drag chains of welded construction, attachments and sprockets

ISO 6972:2002
Cranked-link mill chains of welded construction, attachments and sprockets

ISO 6974-1:2001
Natural gas. Determination of composition with defined uncertainty by gas chromatography. Guidelines for tailored analysis

ISO 6974-2:2002
Natural gas. Determination of composition with defined uncertainty by gas chromatography. Measuring-system characteristics and statistics for processing of data

ISO 6974-3:2001
Natural gas. Determination of composition with defined uncertainty by gas chromatography. Determination of hydrogen, helium, oxygen, nitrogen, carbon dioxide and hydrocarbons up to C8 using two packed columns

ISO 6974-4:2001
Natural gas. Determination of composition with defined uncertainty by gas chromatography. Determination of nitrogen, carbon dioxide and C1 to C5 and C6+ hydrocarbons for a laboratory and on-line measuring system using two columns

ISO 6974-5:2001
Natural gas. Determination of composition with defined uncertainty by gas chromatography. Determination of nitrogen, carbon dioxide and C1 to C5 and C6+ hydrocarbons for a laboratory and on-line process application using three columns

ISO 6974-6:2002
Natural gas. Determination of composition with defined uncertainty by gas chromatography. Determination of hydrogen, helium, oxygen, nitrogen, carbon dioxide and C$d1 to C$d8 hydrocarbons using three capillary columns

ISO 6980:1996
Specification for reference beta radiations for calibrating dosimeters and dose-rate meters and for determining their response as a function of beta-radiation energy

ISO 6981:1992
Hydraulic fluid power. Cylinders. Rod end plain eyes. Mounting dimensions

ISO 6982:1992
Hydraulic fluid power. Cylinders. Rod end spherical eyes. Mounting dimensions

ISO 6988:1995
Metallic and other non-organic coatings. Sulfur dioxide test with general condensation of moisture

ISO 6989:1981
Textiles fibres. Determination of length and length distribution of staple fibres (by measurement of single fibres)

You have no rights to post comments