Glossary / Lexicon

- List of Asean Standards approved/withdrawn/amended in 1996 (Singapore) : SS 354 :
Specification for printed boards - Part I 1 : 1 996 'Flex-rigid multilayer printed boards with through connections (Endorsement with amendments of IEC326- 1991-11 )

SS ISO 188

1982
*Rubber, vulcanized - Accelerated ageing or heat- resistance tests

SS ISO 8630 - I : 1987
'Disk cartridges - Information processing - Data interchange on 130 mm (5.25 in) flexible disk cartridges using modified frequency modulation recording at 1 3 262 ftprad, on 80 tracks on each side - Dimensional, physical and magnetic characteristics

SS ISO 8630 - 2 -. 1987
'Disk cartridges - Information processing - Data interchange on 130 mm (5.25 in) flexible disk cartridges using modified frequency modulation recording at 1 3 262 ftprad, on 80 tracks on each side - Track format A for 77 tracks

SS ISO 8630-3 : 1987
'Disk cartridges - Information processing - Data interchange on 130 mm (5.25 in) flexible disk cartridges using modified frequency modulation recording at 1 3 262 ftprad, on 80 tracks on each side - Track format B for 80 tracks

SS ISO 8860-1 : 1987
'Disk cartridges - Information processing - Data interchange on 90 mm (3.5 in) flexible disk cartridges using modified frequency modulation recording at 7 958 ftrad, on 80 tracks on each side - Dimensional, physical and magnetic characteristics

SS ISO 8860-2 : 1987
'Disk cartridges - Information processing - Data interchange on 90 mm (3.5 in) flexible disk cartridges using modified frequency modulation recording at 7 958 ftrad, on 80 tracks on each side - Track format

SS ISO/IEC 9529-1 : 1989
'Disk cartridges - Information processing systems - Data interchange on 90 mm (3.5 in) flexible disk cartridges using modified frequency modultion recording at 1 5 916 ftprad, on 80 tracks on each side - Dimensional, physical and magnetic characteristics

SS ISO/IEC 9529- 1989-02
'Disk cartridges - Information processing systems - Data interchange on 90 mm (3-5 in) flexible disk cartridges using modified frequency modulation recording at 1 5 916 ftrad, on 80 tracks on each side - Track format

SS ISO 11530 : 1993
*Hydraulic jacks

SS IEC 326-12 : 1992
Specification for printed boards - Mass lamination panels (semi-manufactured) multilayer printed boards

SS 378 : 1996
Specification for low capacity WC flushing cisterns up to 4.5 L maximum

SS 379 : 1996
Specification for vitreous china WC pans for use with low capacity WC flushing cisterns up to 4.5 L maximum

REVISION

SS 196 : 1996
'Technical drawings - Method of indicating surface texture on drawings (Endorsement with amendment of ISO 1302 : 1992)

SS 209 : 1996
Specification for battery-operated emergency power supply for lighting, ventilation and alarm bell of lifts

SS 256 : 1996
Specification for float operated valves (excluding floats) - Diaphragm type (plastic body) for cold water services

SS 263 :
Specification for luminaires Part 1 ; 1996 *General requirements and tests (Endorsement with amendment of IEC 598- 1992-01 )

SS 270 :1996
Specification for elastomeric seals for joints in pipeworks and pipelines

SS 291 :1996
Specification for conductors in insulated cables and cords

SS 358 :
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V

Part 3 : 1996 Non-sheathed cables for fixed
wiring (Endorsement with amendments of IEC 227-3 : 1993) (Revision of SS IEC 227-3 : 1979)

Part 4 : 1996 Sheathed cables for fixed wiring
(Endorsement with amendment of IEC 227- 1993-04 ) (Revision of SS 227-4 : 1979)

SS ISO 2553 : 1992
'Welded, brazed and soldered joints - Symbolic representation on drawings (Revision of SS 200 : 1985)

SS ISO 3040 : 1990
*Technical drawings - Dimensioning and tolerancing cones (Revision of SS 258 : 1982)

SS IEC 227-1 : 1993
Polyvinly chloride insulated cables of rated voltages up to and including 450/750 V - General requirements (Revision of SS 358 : Part 1 : 1 99 1)

CP 31 : 1996
Code of practice for installation, operation, maintenance, performance and constructional requirements of mains failure standby generating systems

CP 60 : 1996
Code of practice for bunkering by bunker barges/ tankers

SS 88 : 1978
Specification for mineral solvents (white spirit and related hydrocarbon solvents) for paints and other purposes

SS 89 : 1981
Specification for extenders for paints

SS 92 : 1981
Specification for iron oxide pigments for paints

SS 141 : 1976
Specification for unplasticized PVC pipes for cold water services and industrial uses (Confirmation with amendment)

SS 272 : 1983
Specification for unplasticized PVC pipes ground for drainlines and sewers (Confirmation with amendment)

SS 310 ; 1986
Specification for concrete interlocking roofing tiles (Confirmation with amendment)

SS 358 :-
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V

Part 2 : 1991 Test methods (Confirmation with
amendment and re-numbering of SS IEC 227- 1979-02 )

Part 5 : 1991 Flexible cables (cords)
(Confirmation with amendment and re-numbering of SS IEC 227-5 : 1979)

CP 36 : 1987
Modular coordination for the building industry

SS IEC 227-6 : 1985
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Lift cables and cables for flexible connections

AMENDMENT

SS 75 : Part 2 : 1978
Specification for draw-off taps and stopvalves for water services (screw-down pattern), Part 2 : Draw-off taps and above-ground stopvalves (Amendment No. 1, February 1996)

SS 97 : Part I : 1994
Specification for residual current circuit breaker without integral overcurrent protection for household and similar uses, Part 1 : General rules (Amendment No. 2, February 1996)

SS 141 : 1976
Specification for unplasticized PVC pipes for cold water services and industrial uses (Amendment No 1, February 1996)

SS 272 - 1983
Specification for unplasticized PVC pipes below ground for drainlines and sewers (Amendment No. 1, February 1996)

SS 310 : 1986
Specification for concrete interlocking roofing tiles (Amendment No. 1, February 1996)

SS 358 :
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V

Part 5 : 1991 Flexible cables (cords) (Amendment
No. 1, February 1996)

SS 360 : 1992
Specification for performance and construction of electric circulating fans and regulators (Amendment No. 2, February 1996)

SS IEC 227 - 2 : 1979
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Test methods (Amendment No. 1, February 1996)

WITHDRAWAL

SS 236 :1980
Specification for flexible cords

SS 282 : 1984
Specification for metal cutting bandsaw blades

SS 296: 1984
Specification for transistorised ballasts for tubular fluorescent lamps

You have no rights to post comments